top of page
DSC05809c.JPG

SP3: Medium Pendulum Wall Clock

​

This is a reduced size version of the previous clock that was is designed to be printed on a Prusa Mini or any machine with a print area of at least 175x175mm. It is still an impressive clock with a 6.4" (16cm) dial and an overall height of 16.5" (42cm). The escapement was modified to reduce the pendulum length to be proportional to the rest of the clock.

​

The assembly process is identical to the previous clock, so you can follow along with the SP2 assembly videos. The assembly were updated with slightly different gear ratios, so a different assembly document was created.

 

Side Profile

DSC05815b.JPG

 

Comparison of this clock (center) vs SP1 and SP2

DSC05805c.JPG
bottom of page