Clock Forum

Good morning everyone. i have the large easy build clock and i cannot seam to get it running correctly. i have made sure that the bearings cleaned. have put the gears in one set at a time. and put the face on to make sure that the gears are not binding. when i have them all in and the weight on the clock and no pendulum it spins for a while and then stops. currently i have reprinted most of the gears out of pla+, working on getting the rest printed out. i have upload 2 videos that show what i am talking about. the weight is the 2.8 with an extension and it has 1.5 bottles of bb's in it. the files are larger than allowed here so i will put a google link on here. https://drive.google.com/drive/folders/1Etn1UwumKs6gd6EwQM1bTfs6e-lyIx-8?usp=drive_link thanks again thanks

This is my first time working on CNC Shield and related eletronics. I want to make sure I am doing the modfication (4 edits) correctly. Do you think you can share a picture of the backside of the CNC board after the modification? For example, I am not sure how to do Edit 2, Do i just short the four nodes on the right side, and connect the Vcc on the left to the top node on the right using a wire? Thanks a lot,

I just ordered SP6 silent desktop clock. I am wondering whether it is possible to change the display time (I, II, ...) to numbers (1, 2, 3,...)