WOW can't wait

It was the spring, clock running good.

Problem solved it was the clutch spring.

Steve I checked all that it works perfect, I even put another controller that I have and it does the same thing, it has got to be something in the gears I believe. I reset the clock this morning and so far it is correct, so I don't know. I am thinking about buying more pre-pr0igramed boards. Where did I buy them from?

I don't know which stepper motor you are using for the one I have set the correct speed using the pins farthest to the right .

I did not and still do not see a pattern in the pictures showing 0001 as out, out, out and in. If you had said this in the start it would make it a lot simpler. the clock is running like it should.

Never mind I figured it out clocks works properly now.

Where would the jumper go for the 0001 setting.

Steve on the Silent Shield Clock Controller I have 3 that I purchased assembled from you I have them all with the jumper set like the picture out, out, in, out the clock is too fast two revolutions per minute.

I did the out out in out from left to right it makes no difference clock is too fast, two rotations per minute.

What does MSB and LSB do which one slows the clock.

The controller was all ready programmed.

Steve I have the SP10 clock finished and running, but the second hand is rotating about 2 revolutions per minute how do I slow it down the controller is the latest one I purchased from you.

Okay I figured it out the diagram on page 52 shows 3b on right hand side should be 7b.

I am extremely happy with the results, I received the new controller's thanks, printing the SP10 clock now, can't wait until it is running.

I have printed two SP6 clocks one with the original driver and one with the V4 checked time after running for 34 days the original driver clock is accurate to 3 seconds slow and the V4 clock is to close to count. I am very happy with the results.

I printed it and it came out perfect on my Prusa MK3 I did not the change the settings in Pruse slicer for PLA.

So if I want to print the SP10 I will have to buy it? I would have preferred the files for the SP10 clock .

being a Patreon in the e-mail you sent the clock files to me I do not see the stl for gear_motor_9

Steve I downloaded the file for the SP10 clock it calls for gearmotor 9 I don't see it. Love the clocks. thanks Norm