New Updated SP5B
Steve I've printed the new Updated clock but can't seem to get it to work at all for some reason. I've tried weight from 4lbs to 15 lbs but the escapement wheel seems to do the same thing. I tried leveling it in slightly different spots but still got the same result I've made a video so you can see what it's doing. The pendulum itself will swing for over 25 minutes so there's nothing with that all the bearings are all cleaned and lightly oiled.
68 Views
Elephant foot is where the first layer squishes out and projects beyond the intended outline of the part. The printer needs to push the first layer down to get the part to stick to the plate. The slicer tries to compensate, but it will still extend out if the head is too close.